source: INSTALL@ 12749

Please see the latest Installation instructions on http://ariba-underlay.org/
here: http://ariba-underlay.org/trac/spovnet-base/wiki/BaseInstall

Please see also http://spovnet.de/ for further information
about Ariba and its application.


Prerequisites
=============
ariba depends on libraries that may not be installed on your system:

    * Boost (version >=1.42)
    * GMP
    * CMake (version >=2.8)

and optionally on

    * Log4Cxx (version >= 0.10.0) for more sophisticated logging
    * Avahi for more efficient bootstrapping in local networks
    * LibBluetooth/Bluez for bluetooth support
    * Doxygen to build the documentation

Furthermore, you need default development tools - that are most likely already
installed on your system - such as gcc/g++, libtool, liblt-dev ...


Quick Install
=============

ariba currently builds on Linux systems. Our reference platform is Ubuntu 8.04
with the g++ compiler version 4.1. However, latest Ubuntu releases should work 
too.

Download the latest ariba package from the the download site
http://ariba-underlay.org/downloads:

Extract the archive and change into the project directory:
> tar xfz ./ariba-x.x.x.tar.gz
> cd ariba-x.x.x

Alternatively, you could try to use the latest development code from our SVN
trunk (attention: the code on trunk might break from time to time):
> svn co https://svn.tm.kit.edu/SpoVNet-KA/entwicklung/ariba/trunk ariba-trunk
> cd ariba-trunk

Now create a directory to build ariba in:
> mkdir build
> cd build

Next the makefiles have to be generated and the source compiled:
> cmake ..
> make

HINT: you may use 
> make -j 2 
for a dual processor/core system to speed up the compilation,
make -j 4 if you have quad-core respectively, and so on. If 
the compilation stops, try make without the -j option again.

And finally ariba will be installed into the system:
> make install


Custom Build Options
====================
The build may be customized in various ways by setting CMake options. This can
be done by giving them as arguments on the command line:
> cmake .. -DOPTION=value

by using the CMake GUI which lets you set the variables graphically:
> cmake-gui ..

or running cmake in interactive mode:
> cmake -i ..

The last two ways also give an overview which options exist.

Important options:

CMAKE_INSTALL_PREFIX - Where to install the compiled files. The default on Unix
                       platforms is /usr/local/. If you for example don't want
                       or can't install system wide, you can specify a directory
                       you have control over. The files will be installed to
                       "${prefix}/include/", "${prefix}/lib/" and so on.

CMAKE_BUILD_TYPE     - One of "", "Release", "Debug", "RelWithDebInfo" or
                       "MinSizeRel". This influences the build in various ways
                       (which compiler optimizations are turned on, whether
                       debug symbols are included, what warnings to show etc.).

ENABLE_{AVAHI,BLUETOOTH,LOG4CXX}
                     - If set to OFF or 0 (ON is the default) it disables the
                       support of the feature even if the corresponding library
                       (see above) was detected to be present.

<library>_INCLUDE_DIR - Where the directory containing the header files for
                       <library> is located. If the library is installed in the
                       usual system paths CMake should be able to automatically
                       find the right location. If the library is located
                       elsewhere (e.g. because you compiled it yourself in your
                       home directory) then you may need to set this variable
                       manually.

<library>_LIBRARY    - Where the library file (aka the .so, .a or .dll file) for
                       <library> is located. If the library is installed in the
                       usual system paths CMake should be able to automatically
                       find the right location. If the library is located
                       elsewhere (e.g. because you compiled it yourself in your
                       home directory) then you may need to set this variable
                       manually.

DOCUMENTATION_GENERATE_GRAPHICS
                     - Whether the documentation should include graphics such as
                       inheritance and include graphs (OFF by default). This
                       might take a long time and consume a lot of space.

CMAKE_{C,CXX}_COMPILER - Which C/C++ compiler to use
CMAKE_{C,CXX}_FLAGS  - Which additional flags to give to the compiler (e.g. -pg
                       for profiling support)


Building the Documentation
==========================
To build the documentation once you can build the "docu" target:
> make docu

If you want to build the documentation on every build you can enable the
ALWAYS_BUILD_DOCUMENTATION option in CMake.


Running the PingPong Sample
===========================
The PingPong binary pingpong is installed in "${prefix}/lib/ariba/" or found
directly in the build tree at "sample/pingpong/pingpong". It has one parameter,
a configuration file. You can find sample configuration files in the
"etc/pingpong" folder. If no configuration file is given, the node will randomly
select its NodeID but will not find other nodes. This is because bootstrap
modules are selected in the configuration file.
> ./sample/pingpong/pingpong ../etc/pingpong/settings_node1.cnf

When running the pingpong application it will output a large number of log
messages and the initiator will wait for other nodes to join. You can start them
using the configuration files settings_node1.cnf and settings_node2.cnf. You may
need to adjust the configurations files: currently both node1 and node2 try to
join the initiator on the local machine. This will only work if you start all
instances on a local machine.

Once the PingPong sample is running and the nodes have connected, each node will
send out ping messages to every node he knows in the overlay structure every
5 seconds. You can now e.g. test mobility of ariba and change the IP address of
a node, or switch from LAN connection to WLAN. The links established by the
PingPong sample through ariba are mobility invariant and automatically repaired.


Cross-Compiling for Maemo
=========================
Ariba runs on Nokia Maemo 4 (tested) and probably Maemo 5. We have tested ariba
on an N810 device. Cross-Compiling is done using Scratchbox. Use the
preassembled Scratchbox version provided by Nokia which will install and
configure the complete Scratchbox system automatically.

If you compile for Maemo you have to set the HAVE_MAEMO option in CMake.

Internally there are a number of special cases where handling on Maemo is
different from normal Linux. If you require special handling, do the following
in your code:

#include "ariba/config.h"
...
#ifdef HAVE_MAEMO
 // special Maemo handling
#endif